These precision-cut shims can be used to take the lateral side-to-side play out of your Marlin Firearms or Henry Repeating Arms factory lever. Get rid of that slop in your cycle for a smoother, more linear lever action feel.
Also work with the Ranger Point Precision medium loop levers. If your Marlin factory lever has some side-to-side play, our levers built to specifications will have the same.
Normally only 2 Shims are required, however if the lever is particularly loose, 4 may be required.
– precision steel shims sized .005″(.15mm) for precise tolerance adjustment – usually all you’ll need per rifle.
– Not visible once easily installed
How to install:
1. Remove the lever screw
2. Fit the shim(s) between the lever and the trigger plate
3. Reinstall the screw